1. The power supply of the livestock fan has been disconnected. And remove the control panel to prevent people from accidentally turning on the power, causing circuit danger and casualties. After the power supply of the fan is disconnected, the operator can unscrew the filter screen screw, lift the filter screen, and then pull the shading part of the filter screen outward, so that the filter screen can be easily removed.

2. Take out the fan filter. Rinse with water. In this process, in order to prevent the filter from corroding, it needs to be soaked in water instead of chemicals. At the same time, prevent the water pressure from being too high and prevent the filter from being damaged.

3. When cleaning other parts of the animal husbandry fan, the operator first covers the fan with tape, and then directly connects the tap water to the spray pipe and the cleaning port. To keep it clean, the nozzles can be washed with clean water. In addition, the bottom basin of the livestock fan should also be washed. Cleaning operations should be careful and rigorous to keep systems and components clean.

4. Put the cleaned filter back on the fan and tighten the screws to maintain the reliability of the device.

5. Turn on the main power of the fan again, and it will run normally after about 5 minutes.

Noise Control of Animal Husbandry Fans

The purpose of noise control can be achieved by reducing sound sources, limiting the spread of noise, and hindering the acceptance of noise. In the detailed noise control technology, four methods can be used: sound absorption, noise reduction, sound insulation and vibration reduction.

1. Sound absorption method: Install sound absorption materials around the fan to reduce noise.

2. Muffler method: Install mufflers at the inlet and outlet of the fan to reduce the spread of noise.

3. Sound insulation method: The fan motor is installed in the sound insulation cover to control the spread of noise.

4. Vibration reduction method: Install a shock absorber under the fan motor to control the noise generated by the fan vibration.

5. Others: (add sound insulation and vibration reduction measures according to the actual situation)

The above are the cleaning methods and noise reduction methods of livestock fans. If you want to know other information, you can consult us. Our staff will contact you to help you answer your questions and help you choose suitable products.